Safety Instructions - Klarstein 10032028 Hinweise

SAFETY INSTRUCTIONS

• Before the appliance is used, the main body including the power cord as well as
any fi tted attachment should be checked thoroughly for any defects. Should the
appliance, for instance, have been dropped onto a hard surface, it must no longer
be used: even invisible damage may have adverse effects on the operational safety
of the appliance.
CAUTION
Risk of burns! The surfaces of the appliance, the double-sided grill
plate, grill plate and mini-pans become hot during use. Do not touch
them.
• Do not leave the appliance unattended while in use.
• This appliance is not intended of use by any person(including children) with
reduced physical, sensory or mental capabilities, or lacking experience and
knowledge, unless they have been given supervision or instruction concerning the
use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Caution: Keep any packaging materials well away from children, as they are a
potential source of danger e.g. from suffocation.
• Do not allow the power cord to touch any hot part of the appliance.
• During operation, the appliance must be placed on a heat-resistant surface,
impervious to splashes and stains. When cooking food with a high fat or moisture
content, splashes are not always avoidable.
• Do not position the grill next to a wall or corner, and ensure that no infl ammable
material is stored near it.
• Before use, the double-sided grill plate and the grill plate must be placed on top of
the appliance over the heating element.
• The appliance is not intended to be operated by means of an external timer or
separate remote-control system.
• Always remove the plug from the wall socket: after use, in case of any malfunctions,
and before cleaning the appliance.
• When removing the plug from the wall socket, never pull on the power cord; always
grip the plug itself.
• This appliance is intended for domestic use only and not for commercial
applications.
• In order to comply with safety regulations and to avoid hazards, repairs of
electrical appliances must be carried out by qualifi ed personnel, including the
replacement of the power cord. If repairs are needed, please send the appliance to
one of our customer service departments. The address can be found in the appendix
to this manual.
• If the Supply Cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualifi ed person in order to avoid a hazard.
EN
9