Starting Manual Vacuuming; Starting Manual Sealing; C.) Making Bags From A Foil Roll; Cutting The Foil To Size - Rommelsbacher VAC 285 Bedienungsanleitung

3.) Starting manual vacuuming

• The appliance activates the pump and extracts air from the bag so that a vacuum develops. The pilot
lamp below the button "Manuell" as well as all pilot lamps of the status display light up.
• When the desired vacuum is developed, release the button "Manuell. The pilot lamps of the status
display (except first lamp) go out.

4.) Starting manual sealing

• The appliance starts the sealing of the bag. The pilot lamp below the button "Manuell" shuts off. Die
pilot lamp below the button "Versiegeln" lights up.
• When the sealing is completed, the pilot lamp goes out.
• For removing the bag, fold the handle upwards and then open the upper part to the stop.
• Check the sealing seam. A correct seam should be a smooth straight line without wrinkles and
without showing structure anymore.
• Pull the mains plug after each use and bring the upper part of the appliance into parking position.
Note: You can see the progress of the function in the status display.

C.) Making bags from a foil roll

1.) Cutting the foil to size

• Unwind the desired length of the foil from the roll and cut it with the enclosed cutter or with a
scissors.
• To start, press the button "Manuell" and hold it until
the desired vacuum is produced.
Note: By briefly pressing the button "Manuell"
several times (pulsing), the vacuum can be
determined optimally.
• To start the sealing process, press the button
"Versiegeln".
25