Longitudinal Positioning - Rollei 200 Mark II Bedienungsanleitung

6. Positioning of the nodal point
28

6.1 Longitudinal positioning

Select plane that contains a near object "1" and a distant object "2" wich are
also situated in the same visual orientation in a vertical direction (Fig .10) .
1 . Loosen knob "W" and rotate the camera vertically so that both objects "1"
and "2" appear first at the top and then at the bottom of the shot . Check
whether the height difference "Y" between the two objects is different from
one photo to another . The more consistent the distance is the better the
nodal point is set (see Fig . 11 and 12) .
2 . To achieve better results modify the adjustment in small increments by
moving the base plate "F" . When the correct position has been reached, it
should be noted from the scale on plate .
2
1
ENGLISH
Fig . 10
F
W
Fig . 11
1
Y
Fig . 12
1
Y
2
2