Further Setting Possibilities - Silvercrest KH 2398 Bedienungsanleitung

Selecting 12 or 24 hour time display
1. In automatic mode press the button
MODE/ j six times. In the display
o appears "24 HOUR" for the 24 hour
modus.
2. Press the button DOWN
12 hour modus. In the display o appears
"12 HOUR". Press the button UP
turn to the 24 hour modus.
In the 12 hour mode, „PM" (post meridiem =
afternoon) appears before the time indcator
in the display o from 12:00 to 23:59.
Press the button MODE/
menu settings and to close it down.

Further setting possibilities

Kitchen timer
1. Press the button TIMER g.
2. Using the buttons UP
set the desired time interval (a time span
between 1 minute and 23:59 h is pos-
sible). Pressing and holding one of the
buttons changes the display in ten-minute
intervals. Or press one of the buttons
M1–M4 r–u to recall a saved preset
time for the kitchen timer. The following
times are factory pre-programmed:
M1 r = 5/25 min. (Indicator = T1/5)
M2 t = 10/30 min. (Indicator = T2/6)
M3 y = 15/35 min. (Indicator = T3/7)
M4 u = 20/40 min. (Indicator = T4/8)
3. Press the button TIMER g once again to
start the kitchen timer. In the display o a
clock icon running in reverse and a cook-
ing pot symbol appears.
4. From 30 seconds before expiry of the time
span an acoustic signal sounds, repeating
at shorter intervals the closer the set time
approaches. When the time has expired,
the alarm sounds continuously and with
increasing volume.
5. Press the button TIMER g to terminate the
acoustic signal.
l to select the

1( to re-

j to save the
/DOWN
 
1(/l,
Interrupting the kitchen timer.
• To interrupt the kitchen timer, switch to the
kitchen timer mode by pressing the button
TIMER g.
• Then briefly press the button TIMER g to
interrupt the kitchen timer.
The time is halted, the indicator blinks for 15
seconds. After this period the appliance re-
turns to automatic modus. To restart the kitchen
timer, briefly press the button TIMER g again
to switch back into the kitchen timer mode.
• Press the button TIMER g once again. The
time then continues to run.
• To completely switch the kitchen timer off,
press and hold the button TIMER g for 3
seconds The clock and cooking pot sym-
bol disappear.
Programming the kitchen timer
You can programme frequently used times for
the kitchen timer into the appliance, so that
you do not need to enter them in repeatedly.
As the appliance can be used by several
people, it has user switching, A/B. Both users
can save 8 different timer periods each.
1. First, select the desired user. To switch
between users, press and hold the button
USER/BASS d for two seconds. Depend-
ing on the selected user, the display o
indicates either "A" or "B".
2. Then press the button TIMER g.
3. Using the buttons UP
enter in the desired time.
4. Press the button MEM SET/AMS h. On
the right and next to the time indicator, "T"
lights up.
5. In order to occupy one of the memory
locations 1–4, press the desired memory
location button M1–M4 r–u under
which the time for the kitchen timer should
be saved once. Its number is now shown
to the right of the "T". To occupy one of the
memory locations 5–8, press the desired
memory location button M1–M4 r–u
twice.
- 43 -
/DOWN
 
1(/l