Siemens SIMATIC S7 CPU 417-4 H Produktinformation Seite 16

CPU 417-4H
English
1. Configuration and Commissioning
Modules that Can Be Used for Fault-Tolerant Systems
In contrast to the master on the PROFIBUS-DP listed in Appendix E of the S7-400H
Programmable Controller; Fault-Tolerant Systems manual, release 07/2001, only the CP443-5
Extended communication processor with the order number 6GK7 443-5DX02-0XE0, as of
hardware version 2 and firmware version V3.2.3, may be used as an external master interface.
In contrast to the specifications in Appendix E, you cannot use the FM 352 electronic
CAM module.
Necessary Versions or Order Numbers of Important System Components
System Component
STEP 7
H-Optional package
External Master on PROFIBUS DP
CP443-5 Extended
Redundant DP-Slave-interface module
IM 153-2 and IM 153-2FO
DP/PA Coupler IM 157
Communication module CP443-1
(Industrial Ethernet,
TCP / ISO-Transport)
Communication module CP443-1
(Industrial Ethernet,
TCP / ISO-Transport)
Communication module CP443-5 Basic
(PROFIBUS; S7-Communication)
16
Necessary Versions or Order Number
as of V5.1
as of V5.1
Order No. 6GK7443-5DX02-0XE0 as of
Hardware-version 2 and as of Firmware version
3.2.3
Order No. 6GK7443-5DX03-0XE0 as of hardware
version 1 and as of firmware version 4.0.0.
IM 153-2: 6ES7 153-2AA02-0XB0 as of version 7
IM 153-2FO: 6ES7 153-2AB01-0XB0 as of
version 6
6ES7 157-0AA81-0XA0 as of version 1 and
Firmware version 3.1.0
6GK7443-1EX02-0XE0 as of hardware version 1
and firmware version V5.2
6GK7443-1EX10-0XE0 as of hardware version 1
and firmware version V1.0.1
6GK7443-1EX11-0XE0 as of hardware version 1
and firmware version V1.1.0
6GK7443-5FX01-0XE0 as of hardware version 1
and firmware version 3.1
A5E00130864-03