Herunterladen Diese Seite drucken
Siemens CPU417-4 H Produktinformation
Vorschau ausblenden Andere Handbücher für CPU417-4 H:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

SIMATIC S7
Produktinformation
Product Information
CPU417-4 H, Firmware-Stand V 2.1.0
Deutsch
Diese Produktinformation ist gültig für die CPU 417-4H mit der Bestellnummer
6ES7 417-4HL00-0AB0, Erzeugnisstand 03, Firmware-Stand V 2.1.0 und für die CPU 417-4H
mit der Bestellnummer 6ES7 417-4HL01-0AB0, Erzeugnisstand 01, Firmware-Stand V 2.1.0.
Die Produktinformation enthält wichtige Informationen und ergänzt die Produktbeschreibung
der oben genannten Komponente. Sie ist als separater Bestandteil aufzufassen und in Zwei-
felsfällen in der Verbindlichkeit anderen Aussagen in Handbüchern und Katalogen übergeord-
net.
Die Technischen Daten der oben genannten Komponente finden Sie im Referenzhandbuch
Automatisierungssysteme S7-400, M7-400 Baugruppendaten A5E00069466 ab Ausgabe 03.
Dies ist Bestandteil des Dokumentationspakets mit der Bestellnummer 6ES7498-8AA03-8AA0.
English
This product information document is valid for the CPU 417-4H with the order number
6ES7 417-4HL00-0AB0, version 03, firmware version V 2.1.0 and for the CPU 417-4H with the
order number 6ES7 417-4HL01-0AB0, version 01, firmware version V 2.1.0. The product infor-
mation document contains important information and supplements the product description of
the above components. It should be considered as a separate document and, in cases of
doubt, takes precedence over information contained in manuals and catalogs.
You can find the technical specifications of the above named components in the S7-400,
M7-400 Programmable Controllers, Module Specifications reference manual (A5E00069467 as
of edition 03). This is part of the documentation package with the order number
6ES7498-8AA03-8BA0.
E
Copyright
Siemens AG 2000
Änderungen vorbehalten
Subject to alteration
A5E00073168-02
A5E00073168-02
08.2000
1

Werbung

loading

Inhaltszusammenfassung für Siemens CPU417-4 H

  • Seite 1 Produktinformation A5E00073168-02 Product Information 08.2000 CPU417-4 H, Firmware-Stand V 2.1.0 Deutsch Diese Produktinformation ist gültig für die CPU 417-4H mit der Bestellnummer 6ES7 417-4HL00-0AB0, Erzeugnisstand 03, Firmware-Stand V 2.1.0 und für die CPU 417-4H mit der Bestellnummer 6ES7 417-4HL01-0AB0, Erzeugnisstand 01, Firmware-Stand V 2.1.0.
  • Seite 2 CPU 417-4H Deutsch Aufbau und Inbetriebnahme Einsetzbare Baugruppen für H-Systeme Abweichend von dem im Anhang E des Handbuchs Automatisierungssystem S7-400H, Hoch- verfügbare Systeme aufgeführten Master am PROFIBUS-DP darf als externe Masteranschal- tung nur die Kommunikationsbaugruppe CP443-5 Extended mit der Bestellnummer 6GK7 443-5DX02-0XE0 ab Hardwarestand 2 und Firmware-Version V3.2.3 eingesetzt werden.
  • Seite 3 CPU 417-4H Projektierung Einstellen der CPU-Parameter, die das zyklische Verhalten bestimmen Die CPU-Parameter, die das zyklische Verhalten des Systems bestimmen, geben Sie bei der Hardwarekonfiguration mit STEP 7 vor. Sie befinden sich im Register “Zyklus/Taktmerker”. Fol- gende Einstellungen werden empfohlen: eine möglichst große Zyklusüberwachungszeit, z.
  • Seite 4: Anlagenänderungen Im Laufenden Betrieb

    CPU 417-4H Wenn Sie die Projektierung für eine CPU 417-4H mit V 1.1.x in eine CPU 417-4H mit Firmware- Version > V2.0.0 laden bzw. übernehmen wollen, stellen Sie bitte mit STEP7 die Zykluszeit- überwachung und die Überwachungszeiten für das Aufdaten (s. auch Automatisierungssystem S7-400H, Hochverfügbare Systeme, Abschnitt 5.3) ein.
  • Seite 5 CPU 417-4H Im folgenden wird detailliert beschrieben, wie Sie dabei vorgehen. Die Verweise beziehen sich alle auf das Handbuch Automatisierungssystem S7-400H, Hochverfügbare Systeme. Hinzufügen von Anschaltungsbaugruppen beim Master-Teilsystem Hardware-Konfiguration offline ändern (siehe Abschnitt 10.2.2 bei PCS7 bzw. Abschnitt 10.4.2 bei STEP7) Nur bei STEP7: Organisationsbausteine erweitern und laden (siehe Abschnit 10.4.3) Reserve-CPU stoppen (siehe Abschnitt 10.2.3 bei PCS7 bzw.
  • Seite 6 CPU 417-4H Neue Hardware-Konfiguration in die Reserve-CPU laden (siehe Abschnitt 10.2.4 bei PCS7 bzw. Abschnitt 10.4.5 bei STEP7) Umschalten auf CPU mit geänderter Konfiguration (siehe Abschnitt 10.2.5 bei PCS7 bzw. Abschnitt 10.4.6 bei STEP7) Übergang in den Systemzustand Redundant (siehe Abschnitt 10.2.6 bei PCS7 bzw. Ab- schnitt 10.4.7 bei STEP7) Anwenderprogramm ändern und laden (siehe Abschnitt 10.2.7 bei PCS7 bzw.
  • Seite 7 CPU 417-4H Entfernen von Anschaltungsbaugruppen beim Master-Teilsystem Hardware-Konfiguration offline ändern (siehe Abschnitt 10.3.1 bei PCS7 bzw. Abschnitt 10.5.1 bei STEP7) Anwenderprogramm ändern und laden (siehe Abschnitt 10.3.2 bei PCS7 bzw. Abschnitt 10.5.2 bei STEP7) Reserve-CPU stoppen (siehe Abschnitt 10.3.3 bei PCS7 bzw. Abschnitt 10.5.3 bei STEP7) Neue Hardware-Konfiguration in die Reserve-CPU laden (siehe Abschnitt 10.3.4 bei PCS7 bzw.
  • Seite 8 CPU 417-4H Entfernen von Anschaltungsbaugruppen beim Reserve-Teilsystem Hardware-Konfiguration offline ändern (siehe Abschnitt 10.3.1 bei PCS7 bzw. Abschnitt 10.5.1 bei STEP7) Anwenderprogramm ändern und laden (siehe Abschnitt 10.3.2 bei PCS7 bzw. Abschnitt 10.5.2 bei STEP7) Reserve-CPU stoppen (siehe Abschnitt 10.3.3 bei PCS7 bzw. Abschnitt 10.5.3 bei STEP7) Neue Hardware-Konfiguration in die Reserve-CPU laden (siehe Abschnitt 10.3.4 bei PCS7 bzw.
  • Seite 9: Allgemeine Hinweise

    CPU 417-4H Umschalten auf CPU mit geänderter Konfiguration (siehe Abschnitt 10.3.5 bei PCS7 bzw. Abschnitt 10.5.5 bei STEP7) Stromversorgung des Reserve-Teilsystems abschalten externe DP-Masteranschaltung ziehen Stromversorgung des Reserve-Teilsystems wieder einschalten Übergang in den Systemzustand Redundant (siehe Abschnitt 10.3.6 bei PCS7 bzw. 10.5.6 bei STEP7) Nur bei STEP7: Organisationsbausteine ändern und laden (siehe Abschnitt 10.5.8) Allgemeine Hinweise...
  • Seite 10 CPU 417-4H Funktion Standard-S7-400-CPU CPU 417-4H im Einzelbetrieb bzw. im redundanten Betrieb Voreingestellte Prioritätsklasse bei den OBs 81 bis 87 Reaktion der CPU bei Überlauf des STOP (Ereignis W#16#4541) Aufruf des OB80 in Prioritäts- Startinfopuffers in Prioritätsklasse 26 klasse 28. Falls OB nicht gela- den, STOP.
  • Seite 11 CPU 417-4H Funktion Standard-S7-400-CPU CPU 417-4H im Einzelbetrieb bzw. im redundanten Betrieb Globaldaten-Kommunikation Nein: Weder zyklisch noch über SFC60 “GD_SND” und SFC61 “GD_RCV” S7-Basiskommunikation nein SFC90 “H_CTRL” nein Zentraler Einsatz von FMs Einzelbetrieb: ja Redundanter Betrieb: nein Operator Panel an MPI-Schnittstelle betreibbar Operator Panel an PROFIBUS DP- Einzelbetrieb: ja...
  • Seite 12 Teilverbindung zu Laufzeitverlängerungen. Zusätzliche Informationen im Internet zu SIMATIC-Produkten Der SIMATIC Customer Support bietet Ihnen im Internet umfangreiche Zusatzinformationen zu SIMATIC-Produkten: Allgemeine aktuelle Informationen unter http://www.ad.siemens.de/simatic Aktuelle Produktinformationen und Downloads, die beim Einsatz nützlich sein können, un- ter http://www.ad.siemens.de/simatic-cs A5E00073168-02...
  • Seite 13 CPU 417-4H English Configuration and Commissioning Modules that Can Be Used for Fault-Tolerant Systems In contrast to the master on the PROFIBUS-DP listed in Appendix E of the S7-400H Program- mable Controller; Fault-Tolerant Systems manual, only the CP443-5 Extended communication processor with the order number 6GK7 443-5DX02-0XE0, as of hardware version 2 and firm- ware version V3.2.3, may be used as an external master interface.
  • Seite 14 CPU 417-4H Configuration Setting the CPU Parameters that Determine Cyclic Behavior You can specify the CPU parameters that determine the cyclic behavior of the system when you configure the hardware with STEP 7. They are on the “Cycle/Clock Memory” tab. We re- commend the following settings: The longest possible scan cycle monitoring time (e.g.
  • Seite 15 CPU 417-4H Programming I/O Access Errors Within DP If errors occur accessing existing modules without an obvious cause (error-free station), it might be because the parameter assignment monitoring time has been set too short (see also the information on the parameter assignment monitoring time in Section 2, Configuration). I/O Access Using Word and Double Word Commands If, in the case of I/O access via word and double-word commands, the first byte or the first one to three bytes are present, but the rest of the addressed range is not, “0”...
  • Seite 16 CPU 417-4H Adding Interface Modules in the Case of the Master Subsystem Change the hardware configuration offline (see Section 10.2.2 in PCS7 or Section 10.4.2 in STEP7) STEP7 only: Add to and load organization blocks (see Section 10.4.3) Stop the standby CPU (see Section 10.2.3 for PCS7 or Section 10.4.4 for STEP7) Download the new hardware configuration to the standby CPU (see Section 10.2.4 for PCS7 or Section 10.4.5 for STEP7) Switch to the CPU with a modified configuration (see Section 10.2.5 for PCS7 or Sec-...
  • Seite 17 CPU 417-4H Switch to the CPU with a modified configuration (see Section 10.2.5 for PCS7 or Section 10.4.6 for STEP7) Transition to redundant system mode (see Section 10.2.6 for PCS7 or Section 10.4.7 for STEP7) Change and load the user program (see Section 10.2.7 for PCS7 or 10.4.8 for STEP7) Adding Interface Modules in the Case of the Master and Standby Subsystems Change the hardware configuration offline (see Section 10.2.2 for PCS7 or Section 10.4.2 for STEP7)
  • Seite 18 CPU 417-4H Stop the standby CPU (see Section 10.3.3 for PCS7 or Section 10.5.3 for STEP7) Download the new hardware configuration to the standby CPU (see Section 10.3.4 for PCS7 or Section 10.5.4 for STEP7) Switch to the CPU with a modified configuration (see Section 10.3.5 for PCS7 or Section 10.5.5 for STEP7) Switch off the power supply to the standby subsystem Remove the IM460 and the external DP master interface...
  • Seite 19 CPU 417-4H Removing Interface Modules in Case of the Master and Standby Subsystems Change the hardware configuration offline (see Section 10.3.1 for PCS7 or Section 10.5.1 for STEP7) Change and load the user program (see Section 10.3.2 for PCS7 or Section10.5.2 for STEP7) Stop the standby CPU (see Section 10.3.3 for PCS7 or Section 10.5.3 for STEP7) Download the new hardware configuration to the standby CPU (see Section 10.3.4 for...
  • Seite 20: General Information

    CPU 417-4H General Information The following table lists the differences between operation of a standard S7-400 CPU and a CPU 417-4H Function Standard S7-400 CPU CPU 417-4H in Separate Operation or in Redundant System Mode Use of symbol-oriented messages (SCAN) Multicomputing (OB60, SFC35) Startup without configuration Yes, if no IMs, no CPs and...
  • Seite 21 CPU 417-4H Function Standard S7-400 CPU CPU 417-4H in Separate Operation or in Redundant System Mode Background processing (OB90) Restart (OB101) Specify the rack number and the CPU in the OB start information SSL ID W#16#0019 (status of all No data records for the Data records for all LEDs LEDs) H-specific LEDs...
  • Seite 22 CPU 417-4H Function Standard S7-400 CPU CPU 417-4H in Separate Operation or in Redundant System Mode S7 basic communication SFC90 “H_CTRL” Central use of FMs Separate Operation: Yes Redundant System Mode: Operator Panel use at MPI-interface Operator Panel use at Separate Operation: Yes PROFIBUS DP Redundant System Mode:...
  • Seite 23 Additional Information on SIMATIC Products on the Internet SIMATIC Customer Support provides comprehensive additional information on SIMATIC pro- ducts on the Internet: The latest general information at http://www.ad.siemens.de/simatic The latest product information documents and downloads that may be useful at http://www.ad.siemens.de/simatic-cs...
  • Seite 24 CPU 417-4H A5E00073168-02...