tepro TORONTO XXL Bedienungsanleitung Seite 33

Step 9
Secure the charcoal grate support left
(32) and right (33) to the inside of the rear
wall using screws (A).
Step 10
Hinge the rod of the charcoal grate (21)
into the left charcoal grate support (32)
and stick the other end of the rod into
the top hole of the right charcoal grate
support (33).
Secure the charcoal grate (21) on both
sides with split pins (K).
Step 11
Stick the charcoal grate lever (22) through
the front wall and fasten it to the left side
of the charcoal grate lifting system, using
screw (G), washer (N), and nut (I) for the
front and bolt (P), round nut (O), washer
(N), and nut (I) for the back.
Step 12
Fasten the hood handle (27) to the hood
(26) using washers (L) and screws (C).
Fasten the upper hinges (28) to the rear
side of the hood (26) using screws (D),
washers (L) and and nuts (I).
t
33