tepro TORONTO XXL Bedienungsanleitung Seite 32

t
Step 5
Fasten the lower rack (9) below, between
the four support legs, using screws (A).
Slide the axle (11) through the holes at the
lower end of the left support legs.
Stick a wheel (10) onto each end of the
axle and secure each one in place using
a split pin (K).
Step 6
Fasten the left brace (14) and the right
brace (13) with screws (A) to the rear wall
and the rear support leg.
Fasten the two lower hinges (15) to the
rear wall using screws (E).
32
Step 7
Secure the furnace door (16) to the front
wall using screws (F) and nuts (H).
Step 8
Stick the underlay for the furnace door
handle (19) onto the furnace door handle
(18).
Stick the furnace door handle (18) with the
underlay (19) into the furnace door from
outside.
Stick the furnace door latch (20) onto the
furnace door handle (18) from inside.
Fasten the parts (18,19,20) with a washer
(L), and a thumbscrew (M).