GOK BHK/K EFV Montage- Und Bedienungsanleitung Seite 27

During installation make sure that the withdrawal valve and the piping are aligned. Do not
install the tank regulator under tension. We recommend the "regulator support for CE tanks",
Part no. 02 510 40.
To install the connections, see CONNECTIONS in the assembly manual.
For outdoor applications, the product must be located or protected so that no
dripping water can enter. We recommend installation in under a hood and in a control cabinet,
respectively, or in a housing.
For installation in a dome, we recommend:
Installation of ventilation set (Part No. 02 063 10).
Prevents water getting into the pressure regulator.
For installation on an underground gas tank with long welding sleeve, use the regulator
support for CE tanks (Part No. 02 510 40).
Suitable for all GOK tank regulators.
Suitable for retrofitting.
Install the regulator at an angle to the breather
We recommend that you install the pressure regulator type BHK 052 and type BHK 052B at
an angle to the breather
Risk of asphyxiation from gas leaks in enclosed spaces.
High concentrations of gas can cause difficulty in breathing and lead to
unconsciousness.
A discharge line
product to outdoors.
+ . This allows condensation to flow away better.
Double‐stage tank regulator PS 25 bar
must be connected from the breather on the
11 / 16