GOK BHK/K EFV Montage- Und Bedienungsanleitung Seite 25

Inlet,
optional
Outlet,
optional
All G. and H. connections according to EN 16129. Other connections may also be used.
Trading name and dimensions
acc. to standard
British POL connection
• with sealing fitting and retaining screw
• G.7 = Thread G 5/8 lh
Shell connection, soft
• with rubber gasket and coupling nut
• G.8 = Thread W 21.8 x 1/14 lh
US POL connection
• with sealing fitting and retaining screw
• G.9 = Thread 0.880-14 NGO lh
POL connection, soft
• with rubber gasket and retaining screw
• G.10 = Thread 0.880-14 NGO lh
Compression fitting
• G.15 = compr. fit 8, 10
• G.22 = compr. fit 12, 15, 18, 22, 28 or 35
Trading name and dimensions
acc. to standard
Compression/separation connector
• H.10 = Thread optionally G 3/4, G 1
• Nominal size optionally 12 mm, 15 mm,
18 mm, 22 mm, 28 mm
Screw-in connector
• H.22 = G 1/4, G 3/8, G 1/2, G 3/4 or G 1
• For a screw-in connector with O-ring
Compression fitting
• H.8 = compr. fit 12, compr. fit 15, compr. fit 18,
compr. fit 22, compr. fit 28, compr. fit 35
• H.9 = compr. fit 8, compr. fit 10
Solder/separation connector
• H.10 = Thread G 3/4 or G 1
• Diameter 10 mm to 28 mm
Double‐stage tank regulator PS 25 bar
Installation notes
Spanner size 30
Hexagonal
Spanner size 30
Hexagonal
Spanner size 24
Hexagonal
Spanner size 24
Hexagonal
Installation notes
Spanner sizes
G 3/4 = width 30
G 1 = width 38
Hexagonal
9 / 16