Kärcher HD 6/15-4 Bedienungsanleitung Seite 17

The appliance must not be used if a
connecting line or important parts of the
appliance, e.g. safety devices, high-
pressure hoses, spray guns, are dam-
aged.
Never draw in fluids containing solvents
–
or undiluted acids and solvents! This in-
cludes petrol, paint thinner and heating
oil. The spray mist thus generated is
highly inflammable, explosive and poi-
sonous. Do not use acetone, undiluted
acids and solvents as they are aggres-
sive towards the materials from which
the appliance is made.
If the appliance is used in hazardous ar-
–
eas (e.g. filling stations) the corre-
sponding safety provisions must be
observed. It is not allowed to use the
appliance in hazardous locations.
The appliance must be sitting on an
–
even, stable ground.
Wear ear plugs if the operating instruc-
–
tions of the appliance (Technical data)
mention a noise level of more than 80
dB(A).
All current-conducting parts in the work-
–
ing area must be protected against jet
water.
The lever of the hand spray gun must
–
not be locked during the operation.
Wear protective clothing and safety
–
goggles to protect against splash back
containing water or dirt.
High-pressure jets can be dangerous if
–
improperly used. The jet may not be di-
rected at persons, animals, live electri-
cal equipment or at the appliance itself.
The jet must not be directed at other
–
persons or directed by the user at him/
herself to clean clothing or footwear.
Vehile tyres/ tyre valves may be
–
cleaned only with a minimum spray dis-
tance of 30 cm. Otherwise, the high
pressure spray can cause damage to
the vehicle tyre/ tyre valve. The discol-
ouring of the tyre is the fhe first sign of
damage. Damaged vehicle tyres are a
source of danger.
Do not spray materials containing as-
–
bestos or other health-hazardous sub-
stances.
With short spray lances, there is a risk
–
of injury, as a hand can accidentally
come in contact with the high pressure
jet. If the spray lance is shorter than 75
cm, you must not use a point spray noz-
zle or a rotor nozzle.
Prior to cleaning, a risk assessment
–
must be performed for the surface to be
cleaned to determine the safety and
health requirements. The respective re-
quired protective measures must be
taken.
Do not open the hood when the motor is
–
running.
Let the hoses cool off after hot water op-
–
eration or operate the appliance briefly
using cold water.
In case of extended downtimes, switch
–
the appliance off at the main switch / ap-
pliance switch or remove the mains plug.
The operator must use the appliance
–
properly. The person must consider the
local conditions and must pay attention
to third parties, in particular children,
when working with the appliance.
Never leave the machine unattended so
–
long as it is running.
The appliance may only used by per-
–
sons who have been instructed in han-
dling the appliance or have proven
qualification and expertise in operating
the appliance or have been explicitly
assigned the task of handling the appli-
ance. The appliance must not be oper-
ated by children, young persons or
persons who have not been instructed
accordingly.
This appliance is not intended for use
–
by persons with reduced physical, sen-
sory or mental capabilities.
The appliance must not be operated by
–
children or persons who have not been
instructed accordingly.
– 3
EN
Operations
17