Changing The Default Settings; Understanding The Menu Structure; Using The Menu; Overview Of The Main Menu - AEG DVD 4550 HDMI Bedienungsanleitung

Understanding
the menu structure

Using the menu

Overview of the main menu

Changing the default settings

A large number of default settings can be comfortably changed via the screen
menu.
Press the SETUP button (Fig. 3/25) on the remote control to start the
menu for changing the default settings.

NOTE:
Many of these default settings can be changed via both the remote
control and the menu. The difference is: If you change the default
settings via the remote control, these changes will only be valid until
the DVD-Player is switched off or the DVD is changed.
However, any changes made in the menu are permanent.
The Setup menu has two menu levels:

Main menu: The main level is represented by graphical symbols.
 Sub-menu: The corresponding sub-menu options can be found
under each of the main menu options.
Navigation and selection

Use the Cursor Buttons (Fig. 3/24) (�/�) on the remote control to
browse through the main menu.

In order to change from the main menu to the submenu, press the
cursor button (�).

You can also move through the submenu with the cursor buttons
(�/�).

Select a menu option with the ENTER button (Fig. 3/14).

Use the ENTER button also to select an option (e.g. "PAL" in the
illustration on the left). The selected option (in the example "PAL") is
now highlighted.

To change back from the submenu to the main menu, press the
cursor button (�).

Language Settings (1)

Video Setup Page (2)

Audio Setup Page (3)

Password Setup Page (4)

Various Settings (5)

NOTE:
Some of the menu settings are only available in stop mode (depending
on the DVD).
English
47