Stopping Repeat - AEG DVD 4550 HDMI Bedienungsanleitung

English
42

Stopping repeat

Selecting a section
to be repeated
Using the DVD-menu
Using fast forward or reverse
Enlarging a screen section
Changing the viewing angle
Press the REPEAT button (Fig. 3/28) repeatedly until the words "Repeat
Off" appear.
You can define a freely selected section to be automatically repeated.
To do this, proceed as follows:
1. Mark the beginning of the section to be repeated. During repetition
press the button A-B (Fig. 3/7) on the remote control once. The
message "Rep A-" appears on the screen.
2. Mark the end of the section to be repeated by pressing the A-B-
button on the remote control once again. The message "Rep A-B"
appears on the screen. The previously marked section is now repeated.
Press the A-B-button again to stop the repetition.

NOTE:
On CDs/MP3 CDs the section to be repeated must be within a track.
Normally each DVD has its own menu. Here you can choose chapters,
make settings, etc. This menu is specific for the DVD and can thus not be
explained in detail.
Press the MENU button (Fig. 3/9) to access the DVD-menu. Use the Cur-
sor Buttons (Fig. 3/24) to navigate in the Menu. Press the ENTER button
(Fig. 3/14) to confirm.
If you are in a menu area for direct chapter selection, you can enter the
number of this chapter with the Numerical Buttons (Fig. 3/30) on the
remote control.
The DVD-Player has a fast forward and a fast reverse feature.
1. Press the  F.FWD (Fig. 3/18) or  F.RWD button (Fig. 3/19) to start
fast forward or fast reverse. The current replay direction and the
speed, e.g. " x2" is now displayed on screen.
2. Press the  or  button several times in order to change the speed.
The speed can be accelerated by factor 2, 4, 8 or 16.
3. Press the "PLAY/PAUSE" button (Fig. 3/15) to restart the "normal"
replay when the desired section is reached.
You can change the screen section when viewing DVDs or images.
Press the ZOOM button (Fig. 3/6) to change the screen section. Press the
button several times to select the suitable zoom factor or to return to the
original zoom factor.

NOTE:
With the cursor buttons (Fig. 3/24) you can move through the zoomed
image.
Some DVDs offer the possibility to select the viewing angle.
Press the ANGLE button (Fig. 3/27) to change the viewing angle.

NOTE:
If changing the Viewing Angle is not possible, the message will be
displayed " 1/1".