Audio Setup - AEG DVD 4550 HDMI Bedienungsanleitung

Audio Setup


NOTE:
• If you would like to select the "RGB" setting, please ensure that
your playback device supports this setting.
• By pressing the VIDEO button (Fig. 3/26) you can also switch
between the video output options. (Only in Stop Mode possible.)
HD Resolution
Here you can select the resolution supported by your playback device.
In order to achieve the best possible picture quality, we recommend the
AUTO setting.

Auto: The maximum possible/supported resolution is set automati-
cally.
 480p / 576p; 720p; 1080i; 1080p: The picture is displayed with the
selected resolution.

NOTE:
The "HD" menu can only be selected if in the "Video Output" menu the
"HD" option is activated.
Digital Output
Here you specify the settings for the digital Audio output.

Off: No digital audio signal is produced.

PCM: Output of a digital Audio signal that is converted to a
2-channel signal. Use this setting if your amplifier is a two-channel
stereo amplifier.
 RAW: Output of a digital Audio signal. Use this setting if your ampli-
fier is no two-channel stereo amplifier.

NOTE:
• If there is no Audio output, even though you connected the DVD-
Player to an amplifier, you will most likely have chosen an incorrect
setting for the Audio output.
• Many TV sets only play back the digital audio signal via the HDMI
connection. If connecting via HDMI therefore, select the PCM
setting.
Downsampling
If the medium contains Dolby Digital - Dolby Surround sound this can
be spread over two stereo channels (including via the scart socket).
English
49