Märklin 26510 Bedienungsanleitung Seite 8

Function
Transport Car 2 offers these features:
G Address set at the factory: 33.
Possible only in digital operation with
the 6021 Control Unit:
G Side trackside lights and warning light can be
turned on and off.
G TELEX coupler on the end of the locomotive cou-
pled to the first aid car can be turned on and off.
Important: Locomotive No. 2 and Transport Car 2 are
designed in such a way that they form a functioning
unit when operated with the 6021 Control Unit.
8
The non-powered Locomotive No. 1 offers
these features:
G Built-in function module for controlling
5 different functions in digital operation with
the 6021 Control Unit.
G Address set at the factory: 34.
G Built-in headlights on the end of the locomotive
with a short hood. Whether these lights are on
or off depends on the mode of operation in use
(=> additional information on page 9).
G Permanently mounted, current-conducting close
coupler on the end of the locomotive coupled
to the cars.
G Pickup shoe to provide power to the completely
non-powered part of the train.
Possible only in digital operation with
the 6021 Control Unit:
G Controllable function output by means of the
current-conducting close coupler for turning on
the trackside lights and the warning lights on the
four special cars coupled to this locomotive.
G Sound of 2 different horns (high or low tone) that
can be turned on and off.