Werbung
Verfügbare Sprachen
Verfügbare Sprachen
▲
W A S H I N G T H E T H E R M O B E LT
•
Power plug, connection adapter with power cord and control element must never
come into contact with water or any other liquids.
•
Before washing, always pull the power
plug and remove the power cord with
the control element from the appliance.
To remove the control element, you have
to pull off the connection adapter
•
The easy to clean material and the removable control element with power plug
allow you to hand wash the thermo belt with a mild wool detergent at a max-
imum of 30°C. Do not wring out or reshape.
•
Leave the thermo belt lying to air-dry. Do not use any clothes pins, as they might
damage the heating wires.
•
Never switch the appliance on to dry it! Never place the appliance on an stove
or in the sun to dry it!
•
Once the thermo belt as well as the socket are completely dry, the appliance may
be reconnected to the power and put to use again. To do that, push the con-
nection adapter back into the socket. The thermo belt must only be operated
with the included control element.
•
Caution: Never operate the appliance if it is wet or moist! Always let it
completely air-dry first!
Caution: Do not chemically clean, chlorinate or bleach the
appliance. Do not tumble dry. Do not iron!
Connection adapter
Socket
Pull to remove
79
Werbung
