Siemens RWD62 Installationsanleitung Seite 7

Menu and display
en
Access to info displays
▲or▼
Heating and/or cooling
setpoints for "Comfort"
mode
Heating and/or cooling
setpoints for "Econ-
omy" mode
(Y1 and Y2)
Sensor value (X2)
for auxiliary function
Modulating outputs
values (Y1 and Y2)
Current application
Parameter Description
0-10 Active sensor
DC 0...10 V
#10 ... #89 Application number
ΔX1 / ΔX2 Sensor offset
ABS Absolute limitation
function
Act Active sensor
DC 0...10 V
AnLG Winter/summer
change-over with
temperature sensor
CAS Cascade function
COMP Compensation function PS1
diG Winter/summer
change-over with
thermostat
EXIT Exit commissioning
menu
H Highest value for sen-
sor measuring range
L Lowest value for sen-
sor measuring range
LIM Limitation function
LS Ni 1000 Siemens
sensor
MAX Maximum value for
limitation function
Output end point for
Y1 and Y2
MAXPRIOR Maximum priority
function
MIN Minimum value for
limitation function
Output starting point
for Y1 and Y2
Siemens Building Technologies
Main display
Access to setting displays
(Y1 and Y2)
Level Parameter
PS2
Pt
rEL
PS1
PS2
REM
PS1
SUM
PS1
T
PS1
TN-h / TN-r
PS1
PS1
TN-c / TN-d
PS4
UNT
VR
PS2
WIN
PS2
XDZ
PS1
XP-h / XP-r
PS2
PS3
XP-c / XP-d
PS4
PS1
PS3
PS4
CE1G3342de,en
▲ ▼
and for 5 sec.
Level 4:
Main loop settings
Level 3:
Auxiliary functions
settings
Level 2:
Sensors settings
Level 1:
Application number
Description Level
Pt 1000 sensor PS2
Relative limitation PS1
function
Remote setpoint set- PS1
ting
Summer change-over PS3
temperature setpoint
Time delay for win- PS3
ter/summer change-
over
Integration time for PS4
heating (\ reverse)
sequence
Integration time for PS4
cooling (/ direct) se-
quence
Sensor value units PS2
0...1000 Ω signal PS2
Winter change-over PS3
temperature setpoint
Neutral zone PS4
Proportional band for PS3
heating (\ reverse) PS4
sequence
Proportional band for PS3
cooling (/ direct) se- PS4
quence
Comfort mode PS4
Economy mode PS4
26.08.2009 7/8