Herunterladen Inhalt Inhalt Diese Seite drucken

Conference Calls; Registering And Deregistering Handsets - switel DE11 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für DE11:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

11.3

Conference calls

An external call can be transferred to another internal handset for a conference call. This
enables two handset users to confer with the external caller at the same time.
ëƒ
Ië 2
ƒ
#
During a conference call, press the I button to put the external caller on
hold. Press the I # buttons in succession to activate the conference fa-
cility again.
ƒ
11.4

Registering and deregistering handsets

11.4.1 Registering more SWITEL DE11 handsets
3 sec ‘
After pressing the Paging button, the handset registration process must be
completed within the following 90 seconds:
y
yz
ë
If the handset is already connected to a base station, the corresponding num-
ber flashes.
A search is then made for the base station.
When the base station is found, proceed as follows:
ë
The handset is then registered.
The handset is assigned an internal call number. The handset already registe-
red has the internal call number 1. The second handset registered is assigned
the internal call number 2. The internal call number appears in the right of the
display when in Standby mode.
11.4.2 Registering DECT−GAP handsets from other manufacturers
In order to register a DECT−GAP handset from another manufacturer, follow the instruc-
tions in the operating manual provided by the original manufacturer and then press the
Paging button ‘ on your base station for 3 seconds. Use the PIN to register (default
setting: 0000).
− Multiple Handsets −
HS 1: Take call from the external subscriber
HS 1: Connection is established to other handset
HS 2: The internal call is taken
HS 1: Connects all calls to a joint conference
HS 1 or HS 2: Press the button to end the
conference call.
Initiate the registration function by pressing the
Paging button on the base station
Open the REGISTER menu
Select the REG BASE function and confirm
Enter the number of the base station (1 to 4) and
confirm the input
Enter the PIN (default setting: 0000) and confirm
the input {í}
105

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis