In Case Of Problem - Parrot MKi9000 Bedienungsanleitung

In case of problem

Before you begin
Make sure you have the latest software update on your
Parrot MKi9000. Compare this number with the one on our
website, Downloads section.
Problems while using the phone function
• Make sure your phone is compatible with the Parrot
MKi9000. To do so, refer to the compatibility list of the
Parrot MKi9000 available on our website www.parrot.com,
in the Support & Downloads section.
• If your phone is compatible with the Parrot MKi9000 and if
you already have the latest software update:
1. Erase the memory of the Parrot MKi9000. To do
so, hold down btoh the red and green buttons for 3
seconds.
2. On your telephone, erase the Parrot system from the
list of Bluetooth peripherals (or reboot your iPhone).
3. Repeat the linking procedure for the 2 devices.
Problems while using the music function
• Reboot your iPod / iPhone before connecting it to the
Parrot MKi9000. To reboot your iPod / iPhone (this proce-
dure will not erase any of your data) :
- iPod : press Menu
simultaneously until the iPod reboots.
- iPhone : Press the On/Off button and the Home button
simultaneously until the iPhone reboots. Do not touch
the screen when the message "Slide to shutdown"
appears.
• Some problems may occur if the iPod / USB device is al-
ready connected to the Parrot MKi9000 before you turn on
the ignition. Connect the iPod / USB device once the igni-
tion is turned on.
• If your Parrot MKi9000 is connected to an iPhone and
an USB flash drive, the iPhone has priority: you can only
browse through your iPhone content.
• Make sure that your iPod is updated.
For any other problem or for more information
• Refer to the Parrot MKi9000 FAQ available on our website,
in the FAQ section.
• Consult the Parrot discussion
our website.
• Contact our support team (phone numbers / mail address
on the last but one page).
and the centre button
& help forum on
17