Error Codes - Samsung CM1929A Bedienungsanleitung Und Kochleitfaden

Error Codes

EN
Erroe Items Code
Power E1 -
frequency Error
(50/60Hz)
HVT-I Power E41 One long beep
for 2 sec
Error
HVT-II Power E42 One long beep
for 2 sec
Error
EEPROM Error E5 One long beep
for 2 sec
Error Beep Cause
Power frequency is other than 50 Hz.
The circuitry inside the oven is not working
correctly.
The circuitry inside the oven is not working
correctly.
Memory IC (EEPROM IC) is not working
correctly.
In this case, other features except for
memory function work properly.
(You can operate the oven manually)
Unplug the power cord plug and check if the power frequency is 50 Hz.
Plug the power cord in 50 Hz power source and see If "E1" appears. If the error code is
displayed again even after the correct power source is provided, contact the nearest
service centre.
Unplug the power cord and wait for 10 seconds.
Plug the power cord in again and check if the error code "E41" appears again. If the
symptom persists, contact the nearest service centre.
Unplug the power cord and wait for 10 seconds.
Plug the power cord in again and check if the error code "E42" appears again. If the
symptom persists, contact the nearest service centre.
Press CANCEL pad one or more times and try to start a memory heating. If the error
code "E5" persists, contact your nearest service centre.
14
Remedy