Sachtler Video 18 S2 Bedienungsanleitung Seite 16

Installation
3 .
Hold the pan bar firmly, disengage the vertical brake. Observe how
the payload moves and where it stops.
If the platform stops in a
horizontal position (camera
pointing directly forward) or
falls away evenly in either
direction, the balance is
correct.
4 .
If the payload falls away in either direction (front or back heavy):
(a)
Unlock the sliding balance plate by pushing back the red lever
underneath the balance plate as far as possible.
14
(b)
If the payload tilts backwards (points up), slide it towards the
front of the fluid head (fore). Re-lock the sliding balance plate.
(c)
If the payload tilts forwards (points down), slide it towards the
rear of the fluid head (aft). Re-lock the sliding balance plate.
(d)
Re-check the movement of the payload. If further adjustment is
required, repeat steps a to c.