Declaration Of Conformity; Important Safety Information - Schartec Jet 500 Anleitung

Please read the manual carefully before you begin the installation and use. The installation of your new sliding
gate operator must be performed by a competent expert or a specialist company. A competent person is, in
accordance with EN 12635, considered a person who has appropriate training, qualified knowledge and practical
experience in order to assemble and install a door/gate system properly and safely. The installation or repair
without technical qualifications can cause serious injury, death and / or property damage.
Declaration of Conformity (CE)
The Jet series sliding gate openers from Schartec meet the requirements of the applicable European
and national guidelines. Compliance was demonstrated and corresponding declarations, certificates,
test reports and documents have been obtained by the manufacturer and can be found at:
www.schartec.de/en/ The supplied radio transmitter type SR-2 complies with Directive 2014/53 / EU.
The full text of the EU Declaration of Conformity is available at the following Internet address:
www.schartec.de
Dear Customer,
Thank you for choosing a quality product from Schartec. Thanks to our unique quality management
system, we continuously ensure that Schartec operators meet the highest standards of quality,
reliability, and comfort. Thank you for your purchase and we wish you much pleasure with your new
Schartec sliding gate opener.
ATTENTION! The assembly, maintenance, repair and disassembly of the sliding gate operator is
to be carried out only by qualified persons / specialist companies.
Incorrect assembly or handling of the motor can result in serious injury. For this reason, all
instructions listed in this manual must be followed.
1. Important Safety Instructions
The Jet sliding gate operator is intended exclusively for the operation with private / non-commercial gates.
The maximum gate weight, as well as the allowed maximum gate size must not be exceeded.
The assembly must be carried out according to our specifications in order to avoid hazards. Gate systems
which are located in the public area and are only accessible via a safety device such as, for example,
force limitation may only be operated under supervision.
2. Warranty
We are exempt from the warranty and product liability if the unit has been modified without our prior
consent or improper installations are performed or initiated against our assembly instructions.
Furthermore, we assume no responsibility for the inadvertent or negligent operation of the operator,
improper maintenance of the operator and accessories, improper maintenance or repair of the door/
gate, improper installation of the the motor or the accessories, or the improper installation of the door/
gate. Batteries not covered by the warranty.
3. Warranty cont.
The warranty period is 2 years (batteries excluded)
The warranty time is not extended upon a warranty claim. For replacement deliveries and rectification
work, the warranty period is six months or at least the remainder of the warranty period.
Conditions
The warranty applies only to the country where the product was purchased. The product must have
been purchased through our authorized distribution channels. The warranty only covers damage to
the contractual item itself. Reimbursement of expenditure for dismantling and installation, testing of
corresponding parts, as well as demands for lost profits and damages are excluded from the
guarantee. The receipt of purchase serves as proof of warranty.

Declaration of Conformity

IMPORTANT SAFETY INFORMATION

WARNING!
20