Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
MAINTENANCE
Warning: during replacing battery or measuring, keep the
sensitive mirror from scratch or dirt to avoid damaging the
mirror or influencing the measuring precision; and do not charge the
replaced battery to avoid explosion and safety accident!
Battery installation and replacement
When the symbol
battery immediately.
1. Remove the battery compartment lid with included battery key
or a coin.
2. Insert 2x AAA batteries with correct polarity.
3. Close the battery compartment by screwing it tightly with the
included key or a coin.
Note:
• Use alkaline batteries only.
• Remove the batteries before
any long period of non-use to
avoid the danger of corrosion.
Troubleshooting
Error
101
104
EN
152
153
154
26
Owner's manual
flashes permanently in the display replace the
Possible reason
Low battery level
Calculation error
Too high temperature
Too low temperature
Working range
exceeded
Possible solution
Change the batteries
Repeat the measuerement
Change the environment
Change the environment
Take the measurement within
the range of 0,05 - 70 m
Werbung
Inhaltsverzeichnis
Fehlerbehebung
