UNI-T MIE0149 Bedienungsanleitung Seite 22

Using 3 measurements
Press
the upper point (1) and press
After the first measurement, the value is adopted. Keep the
instrument as horizontal as possible.
EN
22
Owner's manual
1
2
button until
1
2
3
Keep the instrument as
horizontal as possible.
Aim at the lower point (2),
press
second distance is
measured and adopted.
Meanwhile, the height of (1)
and (2) are displayed on the
display. Press
to collect the result. It will
be displayed in the
summary line of the display.
symbol appears on the display. Aim at
button to trigger the measurement.
Aim at the upper point (2)
and press
value is measured
and adopted. Aim at the
lower point (3) and press
button to trigger the
measurement. Meanwhile,
the height of (1), (2) and (3)
will be shown in summary
line. Press
meter will return to single
measurement status.
button, the
button
button. The
button, the