Performing Initial Setup - Sonoro PRESTIGE SO-330 Bedienungsanleitung

3.4

Performing initial setup

When PRESTIGE is powered on for the first time, the "Language' (to be used in the
display) selection appears on the display. Then, the "Setup wizard" appears on the
GB
display. Follow the instructions below to configure some basic settings.
1. When the "Setup Wizard" is displayed, press + or – on the remote control (or rotate
the navigation knob) to select "YES" and then press OK to start the setup
2. You are then prompted to select:
• Time format (12 or 24-hour),
• Source of auto update (Update from radio, Internet or no update).
Depending on the selection you have made, follow the instructions on the display to
further set up date and time, time zone, daylight saving or wireless network. Rotate
the navigation knob on PRESTIGE or press the navigation buttons on the remote
control to make selections and then press OK to confirm (see chapter "Using the
menus").
When update from Internet is selected, the Wi-Fi connection must be first established.
When entering the key of your wireless network, rotate the navigation knob on
PRESTIGE or press the navigation buttons on the remote control to select a character
and then press OK to confirm. To delete the last entry, select [BKSP]. To cancel
entering the key, select [CANCEL]. To confirm the entered key, select [OK].
3. When "Setup wizard completed" appears, press OK to exit the setting.
© sonoro audio GmbH 2018
73