Aux In 1 Mode; Operation; Setup Menu - Sonoro PRESTIGE SO-330 Bedienungsanleitung

13. AUX In 1 mode

13.1

Operation

Your external player (e.g. Blu-ray player) must be connected to the auxiliary input jack
1 of PRESTIGE with an audio cable (with RCA connector, not supplied).
To access the AUX In 1
mode
To start and control
playback
To mute or restore the
sound output
13.2

Setup menu

Press SETUP in the AUX In 1 mode to access the setup menu (see chapter "Using the
menus"). The following options are available and the current settings (if applicable)
are marked with an asterisk (*).
• [Bluetooth headphone]
To connect or disconnect with a Bluetooth headphone, see chapter "Basic
operation".
• [System Settings]
See chapter "System Settings".
• [Main menu]
To access other playback modes, alarm or sleep timer.
© sonoro audio GmbH 2018
Press key on remote control to toggle AUX In. 1
mode.
Or, press MENU once, then
(or rotate the navigation knob) to select the AUX In 1
mode and then press OK to confirm.
Perform all playback operations on the external player.
Press or button.
or .
GB
95