Menu: Configurations - auna IR-110 Anschluss- Und Anwendungshinweise

Mode
Manage My MediaU
Network
Time & Date
Language
Dimmer
Display
Power Management
18

Menu: Configurations

Set the clock mode display in Standby. Select Internet Radio to set the analog
clock Standby or Select Clock Radio to set the digital clock in Standby.
When it is enabled, My mediaU will exist on the main menu. If various mediaU
accounts exist in the IR-110, Select the default login account in here.
• Wireless Network Configuration: Enable/disable WiFi network. When you
enable the WiFi network, the system will automatically select the required
AP. Enter WEP or WPA code to connect the WiFi. If it is accidentally pressed
<- to move a redundant entry, press -> to correct.
• Wireless Network (WPS PBC): If you are using a router with WPS/QSS but-
ton, you may set up the network connection simple via WPS function. Enter
it and go to press the WPS/QSS button on your router within 120 seconds.
The connection between the router and Music Link will then be configured
automatically.
• Manual Configuration: You can choose DHPC (which IP assigned automati-
cally) or manually input IP address for wireless network connection. When
you select manual setting for wired connection, the following have to be
entered: SSID (name of access point), IP Address, subnet mask, default gate-
way, preferred DNS server, alternate DNS server. You may choose (Manage)
specific network if you have setup more than one network connection within
an area.
• Check Network When Power On: Enable/disable WiFi network. When you
enable the WiFi network, the system will automatically search the available
AP. Select required AP. Enter WEP or WPA code to connect the WiFi. If the
wireless network connection is not existing or fails, the icon at the top left
corner will have a cross on it.
• Setup the date and time; set time format display as 12 Hour or 24 Hour; set date
format: YY/MM/DD, DD/MM/YY or MM/DD/YY.
• Turn on/off the Daylight Saving Time (DST). With a wireless network con-
nected, GMT (+00:00) time is a time reference of time setting.
• Add or deduce the hour according to your time zone when you set the time.
Select the desired OSD language (English, German, Spanish, French, Portuguese,
Italian).
Configure the brightness of backlight on the display. Select Standby to set the
brightness of backlight in standby mode, and select Active to set that in opera-
tion mode.
Choose Dimmer Timer to set the duration of the radio changing backlight when
you are not controlling it.
Set the display to Color display or Monochrome display.
Configure to go to standby mode automatically during in the menu or/and wit-
hout Wifi signal. Choose the power management timer (5/15/30mins) to set the
duration of the radio to switch standby mode automatically when you are not
controlling it. Choose Turn off to ignore the power management function.