Snmp - Acer WLAN-G-RU2 Benutzerhandbuch

5.10 SNMP

The Simple Network Management Protocol (SNMP) is an
application layer protocol that facilities the exchange of
management information between network devices. It is part of
TCP/IP (Transmission Control protocol/Internet Protocol) suite and
enables you to control and monitor the network in a simple way.
On the SNMP page, you can edit the basic Agent information and
also configure up to 6 SNMP trap receiver's IP Addresses. When a
trap condition occurs, your router will send an SNMP trap message
to any NMS (Network Management System) specified as trap
receivers, for example, when power supply errors occur.
Notes :
NMS (Network Management System) is an SNMP management
application together with the computer it runs on.
Currently the Company AP Router supports SNMPv1 (SNMP version
1) and SNMPv2 (SNMP version 2) which have a number of features in
common except for some enhancements.
And moreover, you can specify different community names for
authenticating access to the management information, which
function as embedded passwords:
Read: Gives you READ access to all the management
▪
information, but does not allow WRITE access.
Write: Gives you both READ and WRITE access to all the
▪
management information.
Note :
The community name definitions on your NMS must match at least one
of the above two community name definitions.
What do you want to do?
Configure Agent Information, SNMP Trap Host IP Addresses
▪
and Community Names on Your Router
Delete an Existing SNMP Trap Receiver
▪
Delete SNMP Community Names
▪
5.10.1. To Configure Agent Information, SNMP Trap Host IP
Addresses and Community Names on Your Router:
5.10.1.1. On the Advanced navigation bar, click SNMP.
58