Acer WLAN-G-RU2 Benutzerhandbuch Seite 55

Address
Replacem
ent
Address
Translati
on Type
Two Way
Only
5.5.2.4. When you have completed editing all the settings, click Apply,
or click Cancel to undo your changes.
5.5.3. To Delete Special Applications:
5.5.3.1. On the Special Apps page, for any application you want to
delete, type 0 – 0 in the Trigger Port Range box.
5.5.3.2. Click Apply.
Allows you to select Enable or Disable only when
Chaining on UDP is enabled.
Specifies whether binary address replacement
should be performed.
Allows you to select TCP or UDP only when
Address Replacement is enabled.
Specifies whether address translation is performed
on TCP or UDP packets.
Allows you to select either Enable or Disable.
Specifies that a new session is allowed to be
initiated from the same remote host.
50