Filters - Acer WLAN-G-RU2 Benutzerhandbuch

5.3 Filters

On the Filters page, you can set up filters that can selectively allow
traffic to pass in and out of your network. The Company AP Router
comes with 9 factory default filters for you.
In addition to 9 default filters, some filters may be created
automatically to allow Virtual Servers or Special Applications to
function.
We strongly recommend that you choose an empty row when you
want to set up new filters, because overwriting or deleting these
filters may cause some services to be disabled, for example, your
client PCs may NOT be able to access the Internet.
Note – If you have overwritten or deleted the factory default filters, you
can retrieve them at a later time using the Restore Factory Defaults
function on the Tools page. For detailed instructions, see To Restore the
Factory Default Configuration.
What do you want to do?
Set up a Port Filtering or Raw IP Filter
▪
Delete a Port Filtering or Raw IP Filter
▪
5.3.1. To Set up a Port Filtering or Raw IP Filter:
5.3.1.1. On the Advanced navigation bar, click Filters.
The Filters page appears, seen in FIGURE 5-5:
40