Wireless - Acer WLAN-G-RU2 Benutzerhandbuch

4.4. Wireless

Using Wireless, you can configure your router for wireless access.
There are three parts on the Wireless page:
Radio Settings: Allows you to configure your Gateway for
▪
wireless access, including Wireless Enable/Disable, Mode, ESSID,
Beacon Interval, RTS Threshold, Preamble Type, Distribution
System, and so on.
Security Setting: Allows you to configure your Gateway for
▪
security issues.
Status: Allows you to find out your Gateway's AP Radio
▪
statistics and wireless devices of which the AP (Access Point) is
aware.
You can easily toggle between the above three parts on the Wireless
page.
On the Radio Settings page, Wireless Distribution System as defined
by the IEEE 802.11 standard has been made available on the
Company AP Router now. Hence, it is possible to wirelessly connect
Access Points using up to 8 MAC Addresses of PC cards, so that you
can extend a wired infrastructure to locations where cabling is not
available. Thus those users can roam or stay connected to the
available network resources.
What do you want to do?
Set the Wireless Radio Parameters
▪
Set the Wireless Security Parameters
▪
Review Wireless Status
▪
Disable Wireless
▪
4.4.1. To Set the Wireless Radio Parameters:
4.4.1.1. On the Wireless page, select Radio Settings.
The Radio Settings page appears, seen in FIGURE 4-7:
14