Acer WLAN-G-RU2 Benutzerhandbuch Seite 54

FIGURE 5-9: Special Apps Page
5.5.2.3. Select a line corresponding to a specific ID.
Note :
Make sure you have selected an empty line unless you want to
overwrite an existing application.
Enter the following configuration information:
Parameter
Protocol
Trigger
Port
Range
Maximu
m
Activity
Interval
Session
Chaining
Chaining
on UDP
Description
Specifies the communication protocol used by the
application.
Available options are TCP, UDP and Both.
Range of ports used for outgoing traffic. It will
trigger the Gateway to accept certain incoming
requests.
Maximum number of miliseconds after the port
trigger function, within which incoming requests
will be accepted.
Allows you to select either Enable or Disable.
Specifies whether dynamic sessions can be chained,
allowing multi-session triggering.
Allows you to select Enable or Disable only when
Session Chaining is enabled.
Specifies whether the session chaining is allowed on
UDP.
49