Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
AXIL
Quick installation and programming guide
This quick guide is a summary of the complete installation manual. The manual contains safety warnings and
IMPORTANT
other explanations which must be taken into account. The installation manual can be downloaded by going
NOTE
to the "Downloads" section of Erreka website:
http://www.erreka.com/Automatismos/descargaDocumentos.aspx
Electrical wiring
A: Main power supply
B: Flashing light
C: Photocells (Tx / Rx)
D: Pushbutton or key switch
E: Operator
F: Antenna
IMPORTANT: if the optional AAX01
stopper is installed, we recommend
installing the TC exterior closing stopper.
If the AAX01 stopper is not installed, TC is
obligatory.
Unlocking (manual operation)
1 Remove the cover (1) and insert the key (2).
2 Turn the key (2) clockwise and open the cover (3)
completely.
3 Turn the handle (4) clockwise until it reaches the
stopper.
2
4
Elements of the complete installation
Manual operation
1 Turn the handle (4) anti-clockwise until it reaches the
2 Close the cover (3) and turn the key (2) anti-clockwise.
3 Remove the key (2) and position the cover (1).
1
3
2
D198A
We recommend using an electrolock for
leaf lengths of over 2.5m.
TC
Locking (motorised operation)
stopper and remove.
4
2
English
E198A
2
3
1
11
D198B
Werbung
Inhaltsverzeichnis
