Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Notes; Important Notes; Functions; Supplemental Notes - Märklin 49954 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 8

Safety Notes

• This model is to be used only with an operating system
designed for it (Märklin AC, Märklin Delta,
Märklin Digital or Märklin Systems).
• Use only switched mode power supply units and transfor-
mers that are designed for your local power system.
• This model must never be supplied with power from more
than one transformer.
• Pay close attention to the safety notes in the
instructions for your operating system.
• Do not expose the model to direct sunlight, extreme
changes in temperature, or high humidity.
• WARNING! Sharp edges and points required for operation.
• This product contains magnets. Swallowing more than one
magnet may cause death in certain circumstances.
If necessary, see a doctor immediately.

Important Notes

• The operating instructions and the packaging are a com-
ponent part of the product and must therefore be kept as
well as transferred along with the product to others.
• Please see your authorized Märklin dealer for repairs or
spare parts.
• The warranty card included with this product specifies
the warranty conditions.
• Disposing: www.maerklin.com/en/imprint.html
10

Functions

• Recognition of the mode of operation: automatic.
• Mfx technology for the Mobile Station / Central Station.
Name set at the factory: Kranwagen DB AG
• Address set at the factory: 77
• Setting the locomotive parameters (address, accelerati-
on/braking delay, maximum speed):
with the Control Unit, Mobile Station, Central Station.
• Mode of Operation: Locomotive Engineer
• Additional explanations about the mode of operation can
be found in the supplemental instructions (included).
• Various controllable functions.

Supplemental Notes

Moderate speed must be maintained when running the
crane car on a layout. In addition, the transport restraints
must be mounted and the cable must have enough slack so
that it does not become too tight on curves. The supports
must be screwed in place completely, and the boom must lie
flat on the boom tender car. See Pages 24 / 25.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis