Maintain Network Connection; Select Wlan Region; Establishing A Connection To A Network - Medion P85060 Bedienungsanleitung

UPDATE VIA NETWORK
If you have selected the option UPDATE FROM NET, proceed as follows:
 In the next query window set your time zone.
 Then set the automatic setting of summer/winter time to ON or OFF.
NO UPDATE
 If you have selected the last option (NO UPDATE), set the time manually as
follows:
 The digits indicating the date will flash. Use the dial to
set the day and then press the dial to confirm, or use
the arrow buttons on the remote control to set it and
press the OK button to confirm.
 The digits indicating the month will flash. Use the OK
dial to set the month and then press the dial to confirm,
or use the arrow buttons on the remote control to set it and press the OK but-
ton to confirm.
 The digits indicating the year will flash. Use the OK dial to set the year and then
press the dial to confirm, or use the arrow buttons on the remote control to set it
and press the OK button to confirm.
 The digits indicating the hours will flash. Use the OK dial to set the hour and
then press the dial to confirm, or use the arrow buttons on the remote control to
set it and press the OK button to confirm.
 The digits indicating the minutes will flash. Use the OK dial to set the minutes
and then press the dial to confirm, or use the arrow buttons on the remote con-
trol to set them and press the OK button to confirm.

11.3. Maintain network connection

 If the network connection is to be maintained even in standby mode or operat-
ing modes that do not require WLAN (AUX IN, FM radio), select the setting YES.
If you select the setting NO, the network connection is re-established when the
Internet radio is switched back on from the standby mode.

11.4. Select WLAN region

 Select the region in which you are operating the Internet radio.
The device will then start searching for available WLAN networks (access points).

11.5. Establishing a connection to a network

Any networks found will be listed by their name (SSID). WLAN access points which
provide a connection over WPS are displayed with [WPS].
Below these you will see the entries:
RESCAN: start the search again
MANUAL CONFIG.: enter the connection data manually
68 of 144
Set Time/Date
01-01-2016
11:42