5.2. Inserting the battery in the remote control
The remote control is supplied with a 3 V CR2025 lithium battery already inserted.
ATTENTION!
There is a risk of explosion if batteries are replaced
incorrectly.
Replace batteries only with the same or equivalent
type.
NOTICE
When you use the remote control for the first time, pull out the transpar-
ent strip marked "Please remove before use" without opening the bat-
tery compartment.
If the product fails to respond or is slow to respond to the remote control, you will
need to change the battery. Proceed as follows to change the battery:
Pull the battery holder with the battery out of the remote control. Comply with
the legal requirements when disposing of the used battery.
Insert a new 3 V CR2025 battery in the holder with the positive terminal facing
upwards. Always make sure the battery is the right way round.
Push the battery holder complete with battery back into the remote control as
far as it will go.
CR 2025
DE
EN
TR
59 of 144