Free-Standing Set-Up; Connections; Resetting The Device In Case Of Malfunction - Medion P85060 Bedienungsanleitung

5.4. Free-standing set-up

Instead of mounting the device on a cupboard/shelf, you can also put it on a table
or a cupboard without having to fix it permanently into place.
 Place the device on its feet on a stable, level surface near a mains socket.

5.5. Connections

Before connecting the radio, switch it off using the power switch at the right side of
the unit.
 Operation of the FM/DAB radio: Align the aerial towards the rear of the device
for reception.
 Mains adapter: Connect the connector plug on the supplied mains adapter to
the DC IN port and plug the mains plug into an AC 230 V ~ 50 Hz socket.
 LINE OUT: Connect a 3.5 mm stereo jack to the LINE OUT socket to transfer the
stereo sound output of the Internet radio to other audio devices.
 AUX IN: Connect a 3.5 mm stereo jack to the AUX IN socket to play back stereo
sound output from other audio devices via the Internet radio.

5.6. Resetting the device in case of malfunction

If the device fails to react, switch it off using the power switch at the right side of the
unit and then switch it on again after a few seconds.
Then reset the menu settings to the factory settings by accessing the menu SYS-
TEM SETTINGS -> FACTORY RESET and confirming the subsequent prompt
with YES.
You will have to repeat the installation process.
NOTICE!
Please note that all settings, e.g. the network WEP key, will be irretrieva-
bly lost and will need to be input again after the device has been reset.
DE
EN
TR
61 of 144