Dab Radio Functions - auna 10030313 Anleitung

You can enjoy the DAB radio stations in your area (if it has DAB radio broadcasting). Always ensure the
wire antenna is fully extended to get the maximum signal strength. If the reception is not the best, try
to move around the wire antenna. Place the radio close to the window as much as possible.
You can press the arrow buttons (up/down) to select different menu, and you can press the arrow but-
ton (right) or OK button to enter the sub-menu for the one has ">" on right.
Station List:
You can press the arrow button (right)
key to see the station list. If you want
to exit the station list, just press the
HOME button.
Scan:
To full scan the radio stations available in your region.
Manual tune:
This function allows you to check whether a specific frequency can be received in your area and the cor-
responding signal strength. When this option is selected, it will show a list of DAB frequencies. Choose
a frequency and it will display a bar of strength. If the selected frequency is available in your region, the
signal bar will indicate with number of levels depends on the reception.
Prune Invalid:
Some DAB services may stop broadcasting or you may not be able to receive a station. Prune stations
will delete the DAB stations from your station list that can no longer be received.
DRC (Audiodynamikkompression):
Dynamic Range Control (also known as DRC) can make quieter sounds easier to hear when your radio
is used in a noisy environment. This function is only available for the DAB.
• DRC Off – No compression
• DRC High – Maximum compression
• DRC Low – Medium compression
Setting the compression to maximum will "boost" the quiet sounds, whilst keeping the loudest sounds
at their original level.

DAB Radio Functions

41
www.auna.de