Sun Microsystems Sun Fire 880 Rack-Montage-Handbuch Seite 20

Attach the Server Cable Management Bracket
The cable management bracket that attaches to the back of the server may help to
provide strain relief for the cables. See "Managing Cables" on page en-31 for general
cable management guidelines.
1. Locate the server cable management bracket provided with the rackmounting kit.
2. Attach the cable management bracket to the back of the server.
Attach the cable management bracket using three M4 screws as shown in the
following figure.
en-16 Sun Fire 880 Server Rackmounting Guide • October 2001