To Operate Your
2
Thecus VisoGuard NVR
To operate your Thecus VisoGuard NVR, please go through the
steps below.
Important System Settings
Add Camera into System
Create Camera Monitoring
Viewing Recorded Images
A. Important System Settings:
Please be sure the "System Time" has been setup correctly or
the recording time frame will be incorrect. The default time zone
is "CET".
To set the time zone, please refer to the steps below.
1. Select "Host admin" under "System administration"
2. Right click the designated Thecus VisoGuard NVR name
3. Select Modify host
English
7.