Hamilton KHAKI CHRONO WORLDTIMER Bedienungsanleitung Seite 7

PROGRAMMING UTC TIME
NB: UTC time is preprogrammed in your watch. It allows automatic change between summer and winter
time, in synchronization with the 24 locations available.
In case of battery change, for instance, it might be necessary to reprogram UTC time by performing the
following operations:
• Unscrew the crown and pull it out to position (p3).
• Press buttons and
B C
Having accessed the UTC adjustment mode, press button
Press button to save the data and go on to the next adjustment.
D
Example of UTC time to program
• 19 February 2015, 20:17 (8.17 p.m.)
Program the UTC time in the following order: 2015 / 2015 / 02 / 19 / 20 / 17
• Year (tens): position hand 4 at 1 o'clock
Press button
D
• Year (units): position hand 4 at 5 o'clock
Press button
D
• Month: position hand 4 at 2 o'clock
Press button
D
• Date: position hand 4 at 19 minutes
Press button
D
• Hour: check that hand 6 on the 24-hour dial is positioned accordingly, then position hand 4 at 8 o'clock
(i.e. 20:00).
Press button
D
• Minute: position the hand 4 at 17 minutes
Press button
D
• Push the crown back in and screw it in to position (p0).
M042 - INSTRUCTION MANUAL
simultaneously for 2 seconds.
or to move hand 4.
B C
5