Starting Address; Master/Slave Connection - IMG STAGE LINE TWIST-95ZOOM Kurzanleitung

TWIST-95ZOOM
Menu Map
Main Level
Address
Run Mode
Setup
Sys Info
DMX Linking

Starting Address

Master/Slave
Connection
Programming Levels
001–512
DMX
Auto
Sound
Slave
IR
Pan Reverse
Tilt Reverse
Screen Reverse
Pan Angle
Tilt Angle
Sensitivity
Reset
Factory Set
Ver: VX.X
Running Mode: XXXXX
Dmx Address: XXX
Temperature: XXX
The TWIST-95ZOOM works with a DMX controller.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address for this product is 498.
The TWIST-95ZOOM works in Master/Slave mode.
Sets the DMX starting address
09CH
Selects DMX mode
15CH
Selects auto program
Selects Sound-Active mode
Selects Slave mode
Selects infrared control
OFF
Normal pan operation
ON Reverse pan operation
OFF
Normal tilt operation
ON Reverse tilt operation
OFF
Normal display
ON Reverse display
540 Selects he 540° pan angle range
360
Selects he 360° pan angle range
180 Selects he 180° pan angle range
270
Selects he 270° tilt angle range
180 Selects he 180° tilt angle range
090 Selects he 90° tilt angle range
001–100
Sets sound sensitivity
Resets the product
Loads factory defaults
Displays the software version
Displays the current running mode
Displays the current DMX address
Displays the LED temperature in Celsius
6
Description
EN