Manufacturer Declaration - Beko ÖWAMAT 8 Installation Und Betriebsanleitung

BEKO TECHNOLOGIES GMBH
41468 Neuss, GERMANY
Phone: +49 2131 988-0
www.beko-technologies.de
We herewith declare that the products named below conform to the applicable directives and technical
standards. This declaration applies exclusively to the products as delivered. It does not cover components
added at a later stage or modifications made after delivery.
We herewith declare that the products named below as delivered by us conform to the generally recognised
technical rules. The products meet the requirements of the building inspectorate approval of the German
Institute for Structural Engineering DIBt.
Product designation:
Type designation:
Drawing numbers:
Approval number:
Approval body:
The products are manufactured at a factory certified according to the German Water Resources Act WHG
(formerly § 19 l WHG).
The internal production control required for the above approvals is ensured by our quality management
system certified according to ISO 9001.
Neuss, 17/12/2012
ÖWAMAT 8
®

Manufacturer Declaration

BEKO TECHNOLOGIES GMBH
ppa Christian Riedel
Head of Quality Management
Oil/water separator
ÖWAMAT 1 / 2 / 4 / 5R / 6 / 8
01T10003; 02T10003; 04T10003
5RT10003; 06T10003; 08T10002
Z – 54.5 – 110
Deutsches Institut für Bautechnik DIBt
Kolonnenstrasse 30L
D-10829 Berlin
27