Storage - Explorer kallio 2 Bedienungsanleitung

CAUTION:
Do not use warm water since it in-
creases the corrosive action of the
salt.
2. Apply a corrosion protection spray
on all metal, including chrome- and
nickel-plated, surfaces to prevent
corrosion.
After cleaning
1. Dry the scooter with a absorbing
cloth.
2. To prevent corrosion, it is recom-
mended to apply a corrosion pro-
tection spray on all metal, includ-
ing chrome- and nickel-plated, sur-
faces.
3. Use spray oil as a universal cleaner
to remove any remaining dirt.
4. Wax all painted surfaces.
5. Dry the scooter completely if need
to cover it.
WARNING
Make sure that there is no oil or
wax on the brakes or tires. If nec-
essary, clean the brake discs
and brake linings with a regular
brake disc cleaner and wash
the tires with warm water and
a mild detergent.
Before operating the scooter,
test the braking performance and
tires.
NOTE:
Consult a Explorer dealer for advice on
what products to use.
7-2
SCOOTER CARE AND STORAGE

Storage

Short-term
Always store your scooter in a cool, dry
place and, if necessary, protect it
against dust with a scooter cover.
CAUTION:
Please store the scooter in a
well air flow room with dry air
if possible. A place with wet hu-
midity will cause rust.
To prevent corrosion, avoid
damp cellars, stables (because
of the presence of ammonia) and
areas where strong chemicals
are stored.
Long-term
Before storing your scooter for several
months:
1. Follow all the instructions in the
"Clean" section of this chapter.
2. Drain out the fuel from the carburetor
float chamber by loosening the drain
bolt. It will prevent fuel deposits and
cause the hard engine start after-
ward. Pour the drained fuel into the
fuel tank.
EAU10122