Inhaltsverzeichnis
Werbung
Accessory
Store the included accessory
in the provided notches on
the charging station. So you
will have the needed tools
always ready to hand.
Working LED (3)
When operating the mini grinder the
built-in working LED will turn on in
order to illuminate the working area.
Hints for the correct use of the Mini Grinder
For the most applications it is recommended to use
the mini grinder the highest speed setting. However,
keep in mind that certain materials (plastics, metals)
can be damaged by high-speed generated heat.
These materials should be worked on slow speed.
Higher speeds are better for drilling, carving, cutting,
routing, shaping, and cutting rabbets in workpieces.
Slow speed is usually best for polishing delicate
surfaces, for wood carving and fragile model parts.
Do not press the tool on the surface in order not to
damage the tool and the workpiece.
Operation
22
Werbung
Inhaltsverzeichnis
