Cleaning And Maintenance; Technical Specifications - Velleman VDL150RGML Bedienungsanleitung

Note
It is strongly recommended to switch off the device after 2 hours of
continuous operation to let the laser cool down.

6. Cleaning and Maintenance

• Disconnect the device from the mains prior to maintenance activities.
Let the device cool down.
• All screws should be tightened and free of corrosion.
• The housing, visible parts, mounting supports and the installation
location (e.g. ceiling, suspension, trussing) should not be deformed,
modified or tampered with e.g. do not drill extra holes in mounting
supports, do not change the location of the connections.
• Mechanically moving parts must not show any signs of wear and tear.
• The electric power supply cables must not show any damage. Have a
qualified technician maintain the device.
• Wipe the device regularly with a moist, lint-free cloth. Do not use
alcohol or solvents.

7. Technical Specifications

power supply
laser class
laser power
dimensions
weight
Use this device with original accessories only. Velleman nv cannot
be held responsible in the event of damage or injury resulting from
(incorrect) use of this device.
For more info concerning this product and the latest version of this
manual, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior
notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All
worldwide rights reserved. No part of this manual may be copied,
reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 03 – 12/11/2013
VDL150RGML
110-240 Vac 50-60 Hz - 5 Vdc
3B
green: 300 mW (532 nm)
red: 100 mW (660 nm)
120 x 90 x 50 mm
320 g
6 ©Velleman nv