Standard Functions - Comelit 6501 Technisches Handbuch

STANDARD FUNCTIONS

Answering a call
On receipt of a call from the external unit:
1. In the case of a main "master" monitor (max. 1 per
apartment) and up to 3 secondary "slave" monitors,
the image from the external unit automatically appears
on the monitor.
9000: Waiting for Reply
• To activate/deactivate the audio, press
• To activate the external unit door lock function, press
2. In the case of secondary "slave" monitors (from 4th
to 15th) the indication of a call from the external unit
appears.
EXTERNAL UNIT CALL
Waiting for Reply
• To enable/disable the audio and acquire the video signal,
press .
• To activate the external unit door lock function, press
• To display the image
communication with the external unit, press
3. During a call
} Press the display to open the video menu.
.
100
without activating audio
.
Record message. (If enabled from a secondary
monitor, the audio line with the external unit must be
active for the audio to be recorded)
Brightness: (press
Contrast: (press
Volume: (press
Close video menu.
Lock-release
} To activate the external unit door lock function, press
.
Self-ignition
The Self-ignition function (disabled by default but can
be programmed by the installer) can be used to display
images from the camera associated with an external unit or
from a remote camera.
} Press the key (
ignition" function to display the images from the camera.
Intercom call
.
The intercom function (disabled by default but can be
programmed by the installer) can be used to call an
internal unit.
} Press the key (1 / 2) programmed for the intercom
function to make the call.
I/O Actuator function
The actuator function (disabled by default but can be
programmed by the installer) can be used to activate the
relay for a specifi c actuator installed in the system.
} Press the key (1/2) programmed for the "I/O Actuator"
function to carry out the programmed procedure.
Privacy/Doctor function
• The Privacy function (default) disables the ringtone
for intercom calls, calls from the external unit and
switchboard calls.
• The Doctor function (programmable) enables automatic
activation of the lock-release in response to a call from
the external unit.
• The Privacy + Doctor function (programmable), as well
as disabling the door-entry phone ringtone in the same
.
way as the Privacy function, also enables automatic
activation of the lock-release in response to a call from
the external unit.
} Press ( ) to activate the Privacy/Doctor/Privacy+Doctor
function.
The red LED
»
active.
to adjust).
to adjust).
to adjust).
/ 1 / 2) programmed for the "Self-
indicates that the function is
11