Comelit 6501 Technisches Handbuch Seite 15

4. Speak into the microphone to record your message
(max. 20 sec.).
5. Press "STOP" (or let the 20 sec. period elapse) to
stop and save the recording.
Listening to a memory message
1. Press USER to access the user menu.
USER MENU
Memory
Melodies Settings
2. Press "memory".
MEMORY MENU
Record Message
Listen Recorded Message
3. Press "Listen to recording" to listen to the set memory
message.
4. Press "Listen to recording" again to stop message
playback.
Setting melodies and volumes
The "Set melodies" function can be used to set call and
alarm melodies and volumes.
1. Press USER to access the user menu.
2. Press "Melodies Settings" to access the MELODIES
MENU.
USER MENU
Memory
Melodies Settings
LIST OF MELODIES
External unit call
Floor door call
3. Press your choice of "external unit call", "fl oor door call",
"intercom call" or "Alarms" to set the corresponding
melodies and volumes.
EXTERNAL UNIT CALL
4a
Melody 1
5a
Melody 2
4a.Press any melody to listen to it.
5a.Press to set the melody as the call/alarm melody.
» the tick will appear in green.
Volume adjustment
EXTERNAL UNIT CALL
Melody 1
Melody 2
4b.Press to access the "ringtone volume" adjustment
screen.
5b.Adjust the values by pressing
6b.Press SAVE to save the settings and return to the
previous screen. Press EXIT to return to the previous
screen without saving the settings.
EXTERNAL UNIT CALL EXTERNAL UNIT CALL
Melody 1 Melody 1
Ringtone volume
Melody 2 Melody 2
Melody 3 Melody 3
SAVE
Melody 4 Melody 4
Customised ringtones may be added.
√ Files must be 8 Khz mono 16 bit, in .wav format.
} Place the melodies in the "wav" folder on the SD card to
display them in the relevant menu.
Adjusting key and touch tones
1. Press USER to access the user menu.
USER MENU
Memory
Melodies Settings
Key tone
2. Press "Key tones"
CONFIGURATION.
CONFIGURE VOLUMES
Key tone
Touch Tone
3. Adjust the values by pressing
4b
.
4b 4b
3
EXIT
to access VOLUME
4
4
.
15