Connecting; Adjust The Ice Level Detection (Slim) - EOS E-Cool Wall Gebrauchsanweisung

Connection
1 Mains cable with plug
2 Feed line / flake ice machine
3 Feed line / cooling
4 Drain / cooling
5 Drain
Before taking out ice for use, remove
the ice added to the ice tray during the
disinfection phase.
• Connect the supply and return lines in com-
pliance with the national and international
guidelines.
• Connect the water supply in compliance
with DIN EN 1717. Observe the technical data
for the water supply.
• Connect the power supply.
28
1
2
3
4
Fig. 8
5
GB
Note!
Do not interconnect but separately fit water
drains 4 and 5 to a floor drain. This prevents water
from the cooling system's return pipe from being
pressed into the drain of the condensate dish.
Note!
Excessive voltage fluctuations can impact on
the function of the machine and lead to serious
damage to the electronic control system.