Time Setting; Setting Alarm - Peaq PDR210-W Bedienungsanleitung

ENGLISH
Time and Alarm settings

TIME SETTING

1. Press MENU in any mode setting and
select System settings.
2. Select Time/Date.
3. Press SELECT to confirm the selection.
4. Select the desired submenu with the
SELECT knob:
• Set Time/Date:
Manual time and date setting
• Auto update:
Selection between update from FM,
Network and No update
• Set format:
Selection between 12/24 hour format
• Set time zone:
- Set daylight savings

SETTING ALARM

1. Press MENU in any mode setting and
select Main menu.
2. Select Alarms.
3. Select Alarm 1 or 2 in the main menu
or press ALARM button on the remote
control.
48
IM_PDR210-B/W_140618_V02_HR_1.indb 48
4. Select one of the two waking times in
order to save it:
Enable
Select how the alarm clock should be
switched on:
• Select off to deactivate the alarm.
• Select daily, once, weekend or week
days to activate the alarm.
Time
Set the time at which the alarm should be
set.
Mode
Select the mode for the alarm clock here:
• FM: Wake up with FM-Radio
• Internet Radio: Wake up with Internet
radio
• Buzzer: Wake up with alarm tone
Volume (0-32)
Here you can set the volume with which the
alarm clock will be switched on.
Save
Save the alarm setting.
Note: During alarm you can change the
snooze period by repeatedly pressing on the
SNOOZE button on the remote control.
SWITCHING OFF THE ALARM TONE
Once the alarm sounds, press
alarm is switched off.
and the
23/6/14 10:58 AM